FOR ALL Seeburg Jukebox models, SMC & 10079M. NEW MCU (Gen 2) REPLACEMENT board

Description

<<<<< NOTES <<<<<
>>> NOW  AVAILABLE!
<<<<
All units now have
RED  LED's, in the credit section only
Should you order, and have a problem--PLEASE, contact me prior to writing negative feed back-- I will do all I can to help you-- I want to fulfill my sales agreement as written, to the best of my ability !
SALES
TAX
NOTE
:  eBay, NOT the seller, now is responsible for collecting this--SELLER can NOT control this !!
The link to this information is available at
https://www.ebay.com/help/buying/paying-items/paying-tax-ebay-purchases?id=4771
Out of the USA, you may ignore the "shipping price" --will ship at cost world wide, if requested--with-OUT "insurance" ! (FULL insurance MUST BE REQUESTED/PAID FOR PRIOR TO SHIPMENT !  Non payment of this indicates you, THE PURCHASER, assume full responsibility for the item, after I deliver it to shipping co.)  -which is lower then what eBay calculates .
We've been building them since 2009  (OMG--how time fly's !)--Ignore eBay's, "number sold"-- as it's offered elsewhere  --over 1300 built/sold !  (and as far as I know--still working !)-  Only one small "software" up-date, in 2018 !
----------------------------------------------------------------------------------------------------------------
1st photo shows two, new, SINGLE BOARD, MCU, ( Micro Computer Unit), Gen 2's--component side (L), and display/keyboard side (R)--Original, three tier board shown,  in center, and in last photo, is shown for comparison purposes only. This is a newly developed, and built, replacement computer board, for all Seeburg SMC type jukeboxes (SMC-1,-2,-3,-4, and 10079-M)( "Disco", "Phoenix", "Prelude", "DaVinchi"). This ONE board, replaces the original  three board set. (NOTE: Everything inside the metal MCU box {except metal stand-offs, and nuts, used for mounting, the MCU}, is brand new !!*)
>>NO soldering, re wiring, required. All plugs fit the same as original !
ADVANTAGES, over original MCU:
"---It WORKS !!!---"  (see our eBay feedback ! )
TWO "Chips" ( aka "IC's") replace the approximate 40 chips, used on the original versions !
NO batteries, used. All "defaults", as well as everything else, is easily settable, using just the CPA (service) switches, and the keyboard. ( There are really no "defaults", as once set, that setting becomes the "default", which it will not "forget"!)
NO soldering, re wiring, required All plugs fit the same as original !
Almost any country's "coin system" is programmable-
True, Free play, or coin, settable-- Credit display shows "FP", when on.
Display intensity is settable for room conditions.
Random auto-play is  settable (on/off--sides A, B, or, A&B)
Timing between auto play selections, is settable (zero to 98 minutes).
Motor Save circuit, added.
Added "save credits", and "save selections made", settable options, for power off/on
Diagnostics mode added, and accessed same as are all other "set-ables".
It does everything the  original MCU did--only better, plus there are the added features, as stated above, not available on the original.
The optional "Wall Box Adapter" mentioned in the User Manual, is no longer available, due to lack of sales. The DEC's with a Seeburg built "translator" ("blue box"), will still plug in, and work, the same as on the original MCU's.
The unit offered here, is sold in "kit form".  Included is a "step by step installation"- instruction sheet, a "User's Manual",  plus, 6, additional "special" 8/32 x 1/4 hex head, nuts (see ins. sheet).  Not included, but needed, in most cases: a 1/4 inch nut driver ( or eq. "ignition wrench", or screwdriver), a tube of glue, and ---  optional -- a pair of eye glasses to read the instructions !
EVERY THING *, on/inside the metal MCU housing box, is replaced, with the exception of the six brass mounting studs, and mounting nuts.  I will, for a price (depends on how/what the metal box needs--cleaning/paint ?), mount the new MCU, if you so desire (contact me). The Gen 2 MCU was designed by Data Sync Engineering, with collaboration by me, and another gentleman, who has since passed on. It is built by my wonderful wife, and me. Each and every one, has been extensively tested, by me, for at least, 12 hours -- within the last few days, no longer then 60 days ago !
I have been building, and selling them, since 2009 ( WoW !)--. Only 3, have been returned for repairs, and one of the gent's admitted he "did something wrong"-- he would NOT admit, what (too embarrassed, as this won't happen if one READS, the instructions  ?) ! ( I know from the "damage done", that he had a power supply plug that was missing it's "key", or "index", and he plugged it in "backwards").  Other two new ones both had the same problem as the first one but their owners admitted what they had done ! An old one ( about 7 years old), also came up with a defective number switch--changed it--no problem.
* Battery holder and other stuff on box cover, is not replaced, but can be removed, as it is not used with Gen 2 MCU This is optional.
NOT included -- a tube of glue (see instructions) and an optional, pair of glasses to read the instructions.
Easy, step, by step installation instructions--takes about 15-20 minutes ( If you, PLEASE !!,  READ,  all, the words--on the Instruction Sheet---FIRST--
).  Basically a "Plug & Play installation" Only a 1/4 inch nut driver needed (in most cases), NO soldering needed !   Email assistance, FREE, if needed.
Also--I have no idea where eBay gets the "delivery in x number of days"--I ship ASAP,  usually within 24 hours, when available (check the very first "note"), but have no control over when it will arrive !
Please note:  NON-INSURED SHIPPING, & handling (via Priority Mail), TO THE  USA, is as priced above (.00), in a Priority Mail Envelope, and is NOT insured !  Insured for full value, shipping TOTALS, .50. Payment of the lower charge signifies you agree to this and do not wish to insure it and that YOU, are responsible for safe delivery, not me (one has been "lost").
OUTSIDE The USA--  I WILL ship anywhere in the world --however, since eBay requires sellers to be responsible for delivery service, I need to require that all items be insured for full value, unless you specify  that you accept responsibility for the item, when shipped. The shipping charge will be at my cost, rounded up to nearest dollar.  I will notify you of the charges, when I know where it's going--You may select your favorite shipper, if the shipper operates here, or I will quote USPS/FEDEX, prices if requested.  Whatever works best for you !  You may, if you can, generate a pre-paid label,  for me to use----Ignore eBay's int. shipping price !
NOTE: I have no idea what your country customs office, will, or will not do--PURCHASER, NOT seller, is responsible for any charges !
??Questions??--use eBay "questions"( now--"contact seller"), and ask away, or, better yet,  click "seller's name", above  (have been told that this works on on a "computer", not {some phones} ?)
I have been asked about "a warranty"-- One year, limited, repair, or replace, at my discretion, as long as not "abused", or "destroyed by acts of nature", fob, my shop. After that time--.00 maximum LABOR, repair charge (Once again, limited, as above). All above limited to original purchaser. Proof of purchase may be required.   No other warranty is either expressed, nor implied.
Payment: Cash/Check (US Bank # required), Postal M.O. (US funds),eBay pay, or PayPal (in USD, only), within 3 days of purchase.
Unit can/will, not be shipped, till payment is confirmed !  "All sales final"
Thanks for considering-!-Ron Rich
Got a "note"from a person that had previously purchased one several years ago--note said-"It works flawlessly--need another one !, --for another machine-- lol"
A "cover my butt" note: I have attempted to describe this unit, honestly, and in great detail, however--- Purchaser is responsible for determining the suitability of this product. Neither the designers, manufacture, nor seller,  will be responsible for injury, damage, loss, direct, or consequential, arising out of the use, or inability to use, this product.  Instructions must be followed !  While this new Gen 2 MCU will "compensate" for some of the problems in the rest of the phonograph, it can not do so for all problems, that can occur outside of the MCU.
OK--gotta "A-nudder, complaint"--so I'll address it here-- The supplier has changed the color, several times, on the switch buttons, since this photo was taken--they are now either,
Orange
,
Yellow
,
Brown
, or, Black, or often a combination of colors ( I use what I'm supplied !), rather then the gray (brown?), shown in the photo here--SAME switch--I am assured !!  --and BTW, some "Caps", have shrunk in size and the color of the plastic shrink wrapping differs, from time to time too ! The "sticker" that I used when this photo was taken, is NLA, so a new type is now used - LOL--Ron Rich